As with any electronic device, it is crucial to set up the electronic cigarette for proper use. A poorly cleaned e-cigarette is one of the main factors that lead to stopping vaping and returning to conventional cigarettes. This is a factor that can be easily avoided with simple ideas that the French vaper reveals to you now.
Choose your equipment and e-liquid
First of all, before you start setting up the box, it is important to choose your e-liquid correctly. When selecting your favorite flavor, pay attention to the composition, as well as the choice of your material.
Recommended read : How to Create Your Paint Shades
Correct setting of an electronic cigarette box
There are mainly 3 operating modes
1. Variable Wattage (VW): The goal is to vary the output power of the boxclearomizers by electronically varying the output voltage. For example, for a simple resistance of 0.5 ohms, the output power should be set between 3.0 to 4.8 volts or between 18 and 46 watts. Warning: These are indicative values that differ depending on the resistance used. A recommended application range is indicated for the resistances.
You may also like : Enhance Your Visual Identity with a Branding Agency
2. Temperature Control (TC): The principle is the same as in VW mode. It regulates the heating temperature of the wire, which is the resistance (generally between 180 and 320° C), but with a variable temperature that prevents the wire from exceeding the specified value. Note: Only certain wires are compatible with TC mode (Titanium Ti, NiChrome Ni200, and SS316L Steel).
3. Bypass (semi-regulated mechanical): This mode is generally for experienced vapers. The bypass mode simulates the operation of a mechanical mod but is electronically protected to prevent excessive battery discharge. In this mode, the battery directly supplies its voltage (discharged 4.2 volts at full charge down to 3.0 volts) and only the resistance value determines the power supplied.
Therefore, it is highly recommended to adhere to the power values indicated on the resistances when powering the resistances.
|
RESISTANCE |
WATTS |
|
> 1.5 Ohm |
< 10 watts |
|
1 ohm — 1.5 ohms |
9 to 15 watts |
|
0.5 ohms — 1 Ohm |
20 to 35 watts |
|
0.3 — 0.5 Ohm |
20 to 60 watts |
|
0.15 — 0.3 Ohms |
20 to 100 watts (expert setting) |
On the other hand, it is easy to vary your vape while maintaining the same resistance, but adjust the power to achieve a vapor that is cold, warm, or hot to your taste. However, remember that the higher the resistance is used in the high range, the faster it will be consumed.
Tag: e-cigarette setting